How Long Does It Take To Replace A Sump Pump? – Comprehensive Guide

Depending on various factors, a sump pump replacement can take a long time. This includes whether you take professional help or replace the sump pump. Also, a few other components should be seen before you replace the old sump pump. So tag along with me and everything about replacing the sump pump.

How Long Does It Take To Replace A Sump Pump?

On average, replacing a sump pump takes around 2 hours. The time may vary when it is installed by the professional. Hiring a professional to replace a sump pump might take about 1 hour, but if you replace it on your own, it may take 3 to 4 hours. But this is not all. Before you replace your sump pump, there are a few things that you should ensure, and they are as follows:

• Check that the size of the old and new sump pump matches so that no difficulty occurs while you place it in the already-built pump pit.
• Don’t forget to install the battery backup sump pump that is compatible with the new pump you are considering installing.
• Check that the drain lines of the previous sump pump match the new pump; otherwise, you will need new drain lines.

You may also want to know about sump pump replacement cost

Steps To Replace The Sump Pump

1. The old sump pump must first be unplugged.
2. Disconnect the sump pump from its discharge line.
3. If a new discharge line is required, dispose of the previous one and install a new one.
4. Now connect the new discharge line with the sump pump.
5. Make sure that the sump pump is on the level.
6. The sump pump float switch should be checked.
7. Make sure all screws are tight.
8. Plug in the new sump pump and test it.

The sump pump should be installed by a professional. With enough experience and plumbing knowledge, you can install it yourself. Lastly, ensure that while doing this, the power source is disconnected; otherwise, it could be fatal.

How To Install A Sump Pump

A sump pump is a crucial component of your home’s waterproofing system, helping to keep basements and crawl spaces dry. Installing a sump pump can seem daunting, but with the right tools and knowledge, it can be a fairly straightforward process.

Step 1: Determine the location of your sump pump. The lowest part is the ideal place for a sump pump in a basement or crawl space.

Step 2: Dig a hole. The hole should be large enough to facilitate easy access to the discharge pipe and accommodate the sump pump.

Step 3: Place the sump pump in the hole and connect the discharge pipe. The discharge pipe is the pipe that carries the water away from your home.

Step 4: Install a check valve. The check valve is a one-way valve that prevents water from flowing back into the sump pump.

Step 5: Connect the power source. Sump pumps can be powered either by electricity or a battery backup system.

Step 6: Make sure the sump pump is working. Please turn on the sump pump after filling it with water. If it’s working properly, the water should be pumped out of the discharge pipe.

The following steps will assist you in installing a sump pump to prevent water damage.

Benefits Of Installing A Sump Pump

Installing a sump pump in your home or business offers numerous benefits that can protect your property and improve its overall value. The primary purpose of a sump pump is to prevent water damage and flooding by removing excess water from the lowest point of your building, typically a basement or crawl space. This helps keep your home dry, free of mould and protects against costly water damage repairs. Additionally, a properly installed sump pump can improve the air quality in your home by reducing humidity levels. This can make your home more comfortable and protect against health hazards such as allergies and asthma. Furthermore, having a sump pump can increase the resale value of your property, making it an investment worth considering.

Right Time to Replace the Sump Pump

• Sump pump making Continuous loud noises: when you hear that your sump pump is making weird noises without any major reason, it’s time to change the pump.
• A sump pump is running without a break: when your pump is drawing power units constantly, then it’s time to call the plumber, but if the plumber can’t set it, then it’s time to say goodbye to the old sump pump.
• A sump pump is clogged every 3 to 4 days: Sump pumps require maintenance, but if it clogs every couple of days, it is a sign that your sump pump is malfunctioning, and you need to replace it with a brand new one.
• When the sump pump is old enough: When almost 10 to 20 years have passed, and now the pump is rusty and is not completing its tasks properly, it’s time to bring the new sump pump home.

Frequently Asked Questions

Is Replacing A Sump Pump Easy?

No, it’s not an easy task, but if you have plumbing experience and skills, you can replace the sump pump easily; otherwise, call a professional for help.

What Is The Average Life Expectancy Of A Sump Pump?

Sump pumps usually last between ten and fifteen years. Its lifespan also depends on the brand from which you buy a sump pump and how you maintain it, as both these things can extend the life of the sump pump beyond average.

What Causes Sump Pump Failure?

The sudden failure of the sump pump is due to the power outage. At these times, one should always have a backup or water-powered sump pump to save the basement from flooding.

Concluding Sump Pump Replacement Time

If you replace a sump pump by yourself, it takes 2 to 3 hours, only if you already have some plumbing skills. But if you hire a professional plumber, replacing a sump pump would take around 1 hour. On average, replacing a sump pump takes less time than installing a sump pump for the first time.